Batch of New Parts

September 5, 2014 at 11:02 pm

It’s been quite a while since my last post, but lots of new parts.  All the main parts (pumps, chamber, power supply, deuterium, neutron detection system) have either arrived or are ordered, meaning that all that is left are some small parts which are mostly on the way too.  Everything […]

Vacuum Chamber

September 9, 2013 at 8:45 pm

The vacuum chamber (approximate cost €400-1000) of the Fusor is where fusion takes place.  The chamber must be made of grade 306 stainless steel or higher. Between 100mm and 300mm is a good diameter for the chamber with between 150 mm and 200 mm being optimum, the chamber does not […]